Print Back
  • PlusOne® Ignition System: Direct Spark Ignition (DSI) for reliability and longevity.
  • Scroll Compressors on all models: Provides maximum efficiency and quiet operation.
  • MicroChannel Evaporator & Condenser Coil: Delivers superior performance with a robust surface, a decreased refrigerant requirement and is lighter than conventional copper tube/aluminum fin coils.All-aluminum construction offers superior protection against formicary corrosion and aluminum tube rubbing damage. Design
more
Unit of Measure

Specifications

Voltage

208/230 V

Frequency

60 Hz

Number of Phases

3

Outdoor Sound Rating

77 dB

Refrigerant Charge

69.3 oz1965 g

Minimum Circuit Ampacity

24

Minimum Overcurrent Protection Device Size

30

Maximum Overcurrent Protection Device Size

35

Shipping Weight

476 lb216 kg

Weight

212 kg468 lb

Cooling Performance

Gross Cooling Capacity

42000 Btu/h12.31 kW

EER2

10.6

SEER2

13.4

Nominal CFM

1400 ft³/min661 L/s

AHRI Rated CFM

1510 ft³/min713 L/s

AHRI Net Cooling Capacity

40000 Btu/h11.72 kW

Net Sensible Cooling Capacity

30000 Btu/h8.79 kW

Net Latent Cooling Capacity

10000 Btu/h2.93 kW

Net System Power

3.40 kW

Heating Performance

Heating Input

80000 Btu/h23.44 Btu/h

Heating Output

65000 Btu/h19.04 kW

Temperature Rise Range

35 - 65 ºF19.4 - 36.1 ºC

AFUE

81 %

Steady State Efficiency

82 %

No. Burners

4

No. Stages

1

Gas Connection Pipe Size

0.5 in12.7 mm

Compressor

Type

Single-Stage Scroll

No. Stages

1

Outdoor Coil

Fin Type

Louvered

Tube Type

MicroChannel

MicroChannel Depth

0.709 in18 mm

Face Area

16.18 ft²1.5 m²

Rows

1

FPI

23

Indoor Coil

Fin Type

Louvered

Tube Type

MicroChannel

MicroChannel Depth

1.26 in18 mm

Face Area

3.98 ft²16.18 m²

Rows

1

FPI

20

Refrigerant Control

TX Valves

Drain Connection No.

1

Drain Connection Size

0.75 in19.05 mm

Outdoor Fan

Type

Propeller

No. Used

1

Diameter

22 in558.8 mm

Drive Type

Direct

No. Speeds

1

CFM

4300 ft³/min2029 L/s

No. Motors

1

Horsepower

1/3 hp

Motor RPM

1050

Indoor Fan

Type

FC Centrifugal

No. Used

1

Diameter

12x9 in305x229 mm

Drive Type

Direct

No. Speeds

Multiple

No. Motors

1

Motor HP

3/4 hp

Motor RPM

1050

Motor Frame Size

48

Filter

Type

Disposable

Furnished

No

No. Filters

4

Recommended Size

1x24x24 in25x610x610 mm

Dimensions

Depth

50 13/16 in

Width

47 1/2 in

Height

41 in

Features

N/A

  • Scroll Compressors on all models:Provides maximum efficiency and quiet operation.
  • MicroChannel Evaporator and Condenser Coil: Delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils. All aluminum construction has superior protection against formicary corrosion and aluminum tube rubbing potential. It is easier to clean and has a more robust surface.
  • Thermal Expansion Valves: Standard on all models for precise superheat control, reliability, and energy efficiency at all operating conditions.
  • High Pressure Control: Standard on all models for refrigerant component protection and reliability.
  • Filter Drier: Standard on all models.
  • 100% Factory Run Tested.
  • PlusOne® Ignition System: Proven Direct Spark Ignition System (DSI) for reliability and longevity.
  • PlusOne® Refrigerant Detection System™1: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation – if excess refrigerant is detected.
  • Rugged Base Rail: For improved installation and handling.
  • Easily Accessible Control Box, Furnace Compartment and Blower Section with Slide-Out Blower.
  • Slide and Down Discharge Options Available: All models are shipped ready for horizontal applications.
  • Double Sloped Evaporator Coil Drain Pan: Assures all water is removed from the unit to improve indoor air quality.
  • Louvered Condenser Compartment: Protects the coil against yard hazards and/or weather extremes.
  • Supply and Return Air Openings: Feature a one-inch-tall flange to prevent water migration into the ductwork.
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustain - ability goal of reducing greenhouse gas emissions, while still delivering an exceptional level if energy efficient, dependable comfort.